A well-laid bathroom is not about beautiful tiles, elegant mirrors, vanities, and themes. A thoughtfully crafted bathroom incorporates every element to give it a modern touch, from choosing the best lighting fixtures to designing a great sink. Talking about sink design, you might have heard about sink stoppers, a new tool that is installed at the bottom hole of the sink to hold water in the basin for washing hands, etc. As much as it seems to provide, sometimes it gets blocked, and you must remove it. This might seem an uphill task, but with our article guide, it’s like a cinch. So, let’s explore the guide to remove a bathroom sink stopper with ease.
1. Equipment to Remove Bathroom Sink Stopper
To remove the sink stopper from the bathroom sink, the first thing to do is gather your tools. These supplies will not only help clean the drain but also save you time.
Make sure you have the following supplies and tools before you start to remove the stopper from the bathroom sink.
- An adjustable wrench or pliers with a channel lock
- Screwdriver with flathead
- Plumber’s tape (If Needed)
- A basin or bucket
- A rag or cleaning cloth
If you have this equipment on hand, removing the sink stopper will be easier and more effective.
2. Locate the Stopper Mechanism
Advancing to the next stage to remove the drain stopper from the bathroom sink, you need to spot the stopper mechanism. Usually, the sink stopper is attached to a device underneath the sink.
Two popular kinds of stoppers are as follows:
- Push-Pull Stopper: You can pull up or push down to operate this kind.
- Lift-and-Turn Stopper: To open and close, this kind needs to be twisted.
Before you continue with how to remove the bathroom sink stopper, determine the sort of stopper you have.
3. Turn Off the Water Source to Remove Sink Stopper
The next step in figuring out how to remove a bathroom sink stopper is to cut off the water supply. It is wise to do that in order to avoid unintentional leaks. To turn off the sink, locate the shutoff valves underneath it, which are often located on the wall behind it, and turn them clockwise. To get rid of any residual water in the pipes, turn on the faucet.
4. Put a Bowl or Bucket Underneath the Sink
Underneath the sink, arrange a bucket or basin to catch any water that might leak. This will guard against water damage and keep your workspace tidy. This step is important in knowing how to remove the stopper from a bathroom sink.
5. Take the Stopper Rod off
Usually, the stopper is attached to a rod or linkage system that is located beneath the sink. Remove a drain stopper from a bathroom sink can be done as follows:
- Push-Pull Stopper: Locate a horizontal rod or lever fastened to the drain pipe’s back of the sink. Holding this rod in place is a nut or screw. Use an adjustable wrench or channel lock pliers to loosen it. After that, remove the rod from the stopper with caution.
- Lift-and-Turn Stopper: Typically, this kind is attached to a lever or lift rod. Find the pivot rod that is attached to the stopper mechanism and the drain pipe. Take off the nut or screw that is securing the pivot rod and separate it from the stopper.
6: Take Out the Stopper
After disconnecting the rod or linkage, you can remove the bathroom sink drain stopper.
- Push-Pull Stopper: To extract the stopper, pull it out of the drain aperture. Moreover, if it’s stuck, give it a little twist or wiggle to release it.
- Lift-and-Turn Stopper: Rotate the stopper counterclockwise to unscrew it. After it’s unscrewed, remove it from the drain.
7. Replace the Stopper or Clean It
Once the stopper is out of its place, you can clean the drain if needed. Use a towel or rag to get rid of any accumulation or debris. If you’re replacing the old stopper, compare the two to make sure the new one is the right size and kind.
8. Put the Stopper Back
In case you’re replacing the stopper or reinstalling it, adhere to the following guidelines:
- Reposition the Push-Pull Stopper into the drain opening. Reattach the linkage or horizontal rod to the drain pipe’s rear. To lock the rod in place, tighten the nut or screw.
- Lift-and-Turn Stopper: Reinstall the stopper in the drain opening and tighten the screw until it is securely in place. Tighten any nuts or screws and reattach the pivot rod or linkage to the stopper mechanism.
9. Check the Stopper
As the concluding step of how to remove the stopper in the bathroom sink, check the replaced or reinstalled stopper. Restart the water supply and look for any leaks near the stopper. Moreover, make sure the stopper opens and shuts correctly by giving it a test. To get the desired functionality, adjust the linkage or rod as needed.
10. Closing Tips to Remove Bathroom Sink Stopper
Follow the tips mentioned below:
- Inspect for Leaks: Tighten the connections or look for any damage to the seals if you find any leaks.
- Use Plumber’s Tape: Cover the drain pipe’s threads with the plumber’s tape to ensure a tight seal and stop leaks.
- Regular Maintenance: To avoid clogs and ensure smooth operation, clean the stopper and the sink drain regularly.
Folks, with the appropriate method and equipment, removing the sink stopper from a bathroom sink is a doable task. By following the above-mentioned steps, you can quickly access the stopper, take care of any necessary maintenance, and make sure your bathroom sinks are working properly. Maintaining the best possible condition for your bathroom sink depends on your ability to remove the stopper. This applies to both unclogged drains and simple hardware upgrades.
You can check out the guide to remove six different kinds of drain stoppers in this article for detailed information.
Conclusion
Are you figuring out how to remove the stopper from the bathroom sink drain? Don’t worry we have got you covered. Just follow the simple steps mentioned in the article guide above. It’s time to unclog your drain stopper for a great unwinding session.
